Adjusting The Tracking - Epson EMP-835 User Manual

Adjusting Projected Images Manually
l

Adjusting the Tracking

If vertical stripes appear in the projected images,
and this cannot be fixed using automatic setup,
tracking g
you will need to adjust the
using the following procedure.
(Only effective when RGB signals are being
input)
PROCEDURE
Tracking adjustment can be carried out using either the projector's
control panel or the configuration menus. This procedure explains
how to use the projector's control panel to adjust the tracking.
For adjustment using the configuration menus:
s"Signal" - "Tracking"
p.80
While holding down the [Shift] button on the projector's
control panel, press [ ] or [ ] button until the vertical
stripes disappear from the projected images.
Projector
Decrease the tracking value each
time pressing the [ ] button.
manually
Projector
Increase the tracking value each
time pressing the [ ] button.
TIP
The images will flash when continuous tracking adjustment is carried
out, but this is normal.
User's Guide
75