Connecting to a Computer
Projecting Images from the Computer
The shape and specifications of the computer's monitor port will determine
what type of cable should be used. Check the following to see which type
of port your computer has.
If the Monitor Port is a Mini D-Sub 15-pin Port
Use the accessory computer cable to make the connections.
To monitor port
Computer cable
(accessory)
To [Computer 1] or
[Computer 2] port (blue)
TIP
• After projection starts, change the "Computer1 Input" or
"Computer2 Input" setting in the "Setting" menu to "Analog-
RGB".
p.86
• If more than one external component is connected to the projector,
press the [Comp1] or [Comp2] button on the remote control after
projection starts, or repeatedly press the [Computer/DVI] button on
the projector's control panel to select the signal to be projected.
p.43
19