Adjusting The Platen Gap For Thick Sheets - Epson Stylus Pro 9000 Printer Manual

Caution
To avoid damaging the
printer, never move the
paper set lever while the
Operate or Pause light is
flashing.
6. Push the paper set lever all the way down, then close the lower cover.
PRESS PAUSE BUTTON
7. Press the button. The print head moves and the paper feeds into
Pause
printing position automatically.
(Even if you don't press
printing position automatically after 10 seconds.)
8. Print your page. After it is finished, the printed sheet stays in the printer.
9. To remove the printout, pull the paper set lever all the way up while
holding the sheet.

Adjusting the Platen Gap for Thick Sheets

When you print on thick media, you may need to adjust the platen gap
setting. Normally, the
automatically. However, if print quality is not satisfactory when you use
heavy media, change this setting to
1. Press the
SelecType
the display.
2. Press the button.
Item
3. Press the button.
+
1-17
appears on the control panel display.
READY
, the paper and printer will move into
Pause
setting allows the printer to adjust
AUTO
Follow these steps:
WIDE.
button.
PRINTER SETTING MENU
PLATEN GAP=AUTO
PLATEN GAP=WIDE
Handling Paper
appears on the control panel.
appears on
appears on the display.
appears on the display.
| 1-17