Epson Stylus Pro 9000 Printer Manual page 81

4-12 | Resolving Problems
Note
If you have two rolls of
paper installed, make
sure you secure the roll
that you are not using
with the roll paper belt.
See page 1-8 for more
information.
3. Open the lower cover if necessary.
4. Carefully pull down the jammed paper.
displayed on the control panel.
5. Close the lower cover, if necessary, then press the
the printer off. Press it again to turn it back on.
6. Make sure the
Paper Out
the control panel. Then reload your paper.
4-12
TURN PWR OFF AND ON
light is on and
LOAD PAPER
is
button to turn
Power
is displayed on