Selecting Registered Paper Settings - Epson Stylus Pro 9000 Printer Manual

Epson printer user manual
Hide thumbs Also See for Stylus Pro 9000:
Table of Contents

Advertisement

5. Examine the printed pattern to determine which set of lines is the
straightest (shows the smallest gap), and note the corresponding
number.
In the sample pattern, the lines under number 4 are the straightest.
6. Press the
or - button to select the number noted in step 5. Then press
+
the
button.
Enter
7. Press the
button.
Item
Press the
or - button to select the time in minutes. Start with one
+
minute. If ink still smears, increase the drying time.
This is how long the print head will pause between passes to allow for
ink drying.
8. Press the
or
Pause
menu.

Selecting Registered Paper Settings

Once you have registered the drying time (and thickness) for a type of paper
or other media, you can select it whenever you print on that paper.
1. Press the
SelecType
the display.
2. Press the
button. You see
Item
3. Press the
or - button to select the registered number you want to use.
+
Then press the
Enter
4. Press the
or
Pause
menu.
When you change media, make sure you select the correct setting.
If you are not sure what media setting is in effect, you can print a status
sheet, which shows the current settings. See page 2-3 for instructions.
1-23
DRYING TIME=0 MIN
button to exit the Paper Configuration
SelecType
button until
PAPER CONFIG. MENU
PAPER NUMBER=1.
button.
button to exit the Paper Configuration
SelecType
Handling Paper
|
appears on the display.
appears on
1-23

Advertisement

Table of Contents
loading

Table of Contents