Installing The New Cutter Blade - Epson Stylus Pro 9000 Printer Manual

Maintaining and Transporting the Printer

Installing the New Cutter Blade

After you have removed the used cutter blade, you're ready to install the new
one. Follow these steps:
1. Remove the new blade from its package.
2. Make sure the spring coil is inside the cutter holder. If necessary,
reinstall the coil.
3. Fully insert the new blade into the paper cutter holder in the direction
shown below.
4. Push in the side pin while turning the paper cutter cover to the left to
close the casing.
CLOSE LOWER COVER
5. Close the lower cover. The cutter holder moves to the home (far right)
position and
READY
3-13
appears on the display.
appears on the display.
| 3-13