Printing On Thick Sheets - Epson Stylus Pro 9000 Printer Manual

Caution
To avoid damaging the
printer, never move the
paper set lever while the
Operate or Pause light is
flashing.
5. Push the paper set lever all the way down.
appears on the control panel display.
6. Press the button. The print head moves and the paper feeds into
Pause
printing position automatically.
(Even if you don't press
printing position automatically after 10 seconds.)
7. Print your page. After it is finished, the printed sheet stays in the printer.
8. To remove the printout, pull the paper set lever all the way up while
holding the sheet.

Printing on Thick Sheets

You can print on heavy stock up to B1 size (approximately 28.7 × 40.5
inches). Follow these instructions when you print on card stock or other
media more than 0.5 mm thick.
1. Set the paper hammock to catch your printouts in front of the printer.
See page 1-18 for instructions.
2. Press the
Paper Source
comes on.
3. Make sure the
Operate
pull the paper set lever all the way up.
1-15
Handling Paper
PRESS PAUSE BUTTON
appears on the control panel.
READY
, the paper and printer will move into
Pause
button repeatedly until the
light and light are not flashing. Then
Pause
| 1-15
light
Sheet