Loading Roll Paper For Printing - Epson Stylus Pro 9000 Printer Manual

Caution
To avoid feeding excess
paper through the printer,
make sure you don't
select Sheet when you're
using roll paper.
Caution
If you're using thick roll
paper, choose Roll
Cutter Off. Paper that is
too thick may damage the
cutter.

Loading Roll Paper for Printing

Once the roll paper is attached to the spindle and inserted in the printer,
you're ready to load it for printing. First, open the roll paper cover and make
sure the spindle is inserted correctly. Then follow these steps:
1. Make sure the printer is turned on. Then press the
button until one of the
Choose
• Roll Auto Cut
after each page is printed.
Choose
• Roll Cutter Off
automatically.
Choose
Roll Cutter Off
reel, or if you want to print a series of pages and keep them together
for later cutting.
If you're using the auto cut setting, you can have a trim line printed
on the right edge of your images or pages. If you're not using auto
cut, you can have the line printed on the right and bottom edges of
your pages. See page 1-13 for instructions.
You can also select roll paper settings through your print options,
which will override the control panel settings. See the RIP Station
5100 User Guide or Appendix B or C in this manual for more
information.
1-9
lights comes on.
Roll
Paper out
Roll
Auto Cut
Roll
Cutter Off
if you want the paper to be cut automatically
if you don't want the paper cut
if you're using the optional auto take-up
Handling Paper |
Paper Source
SelecType
Paper Source
Item
+
1-9