Monitoring and Configuring the Printer
3. When you have selected the setting you want, press the
save it.
4. Press the
SelecType
Selecting the Printer's Interface
The printer includes both a parallel and serial interface. You can also install
an optional interface board for networking or additional connectivity. By
default, the printer automatically switches to whichever interface is receiving
data.
You can use the control panel to select an individual interface for sending
data to the printer. Follow these steps:
1. Press the
SelecType
the display.
2. Press the
button repeatedly until
Item
the display. This is the default setting.
Press the
button once to select the parallel interface.
•
+
INTERFACE=PARALLEL
Continue pressing the
•
(optional) interface.
OPTION
You can use the
+
3. When you have selected the setting you want, press the
save it.
4. Press the
SelecType
2-9
button to exit the Printer Setting menu.
button.
PRINTER SETTING MENU
INTERFACE=AUTO*
appears on the display.
button to select the
+
or
button to cycle through all four settings.
–
button to exit the Printer Setting menu.
|
2-9
button to
Enter
appears on
appears on
(serial) or
MAC
button to
Enter