Adjusting The Platen Gap For Thick Or Thin Paper - Epson Stylus 3800 Printer Manual

44 | Handling Paper and Other Media
Caution: To avoid
damaging the printer, do
not select the Narrow
setting when you print
on heavy media.

Adjusting the Platen Gap for Thick or Thin Paper

When you print on unusually thick or thin paper, you may need to adjust
the platen gap setting. Normally, the
to adjust automatically. However, if print quality is not satisfactory when
using very thin or very thick stock, you may need to change this setting using
the printer's menu system.
1. Press the r button.
Menu
2. Press r to select the
3. Press r to select
PLATEN GAP
setting,
STANDARD
4. Press u or d to select
5. Press the Enter button to save the setting. An asterisk appears next to
the selected setting.
6. Press the + Cancel button to exit the menu.
When you switch media again, don't forget to change the setting back to
STANDARD.
If you're printing on non-Epson media, you may also need to create a paper
configuration to optimize your results. See the next section for more
information.
2-44
STANDARD
menu.
Printer Setup
. An asterisk appears next to the current
.
, ,
NARROW WIDE WIDER
setting allows the printer
, or .
WIDEST