Recirculation Kit Installation; Size - Windster WS-5530SS Operation Manual

R. Recirculation Kit Installation (optional)
Note: Before mounting the range hood and recirculation kit, please must refer the
S. Size
following from the manual.
1. P.5 "E. Preparing the Range Hood" remove the top electrical knockout
(recirculation kit is same step)
2. P.7 " G. Providing electrical power"
3. P.8 "H. Mounting Range Hood To Cabinet
(1). Mount the recirculation kit to the bottom
of the cabinet. (Screws not included with
recirculation kit)
(1)
(3). Before mounting the range hood,
be sure to connect the electrical
power cord. Mount the range hood
using the screws porvided to the
bottom (4 sides) of the recirculation kit.
(30" - 5 pcs screws)
(36"/42"/48" - 9 pcs screws)
S. SIZE
(2)
20-7/8"
.
".
(2). After securing the recirclation kit to the
bottom of the cabinet, make sure to run
the path for the electrical power cord.
(3)
(4). Before powering the unit, make sure all
screws and power cord have been
properly connected. After all connections
have been secured your recirculating
range hood is ready for use.
30" (36")(42")
15
(4)