V. Recirculation Kit Installation (optional)
Note: Before mounting the range hood and recirculation kit, please must refer the
following from the manual.
1. P.5 "E. Preparing the Range Hood" remove the top electrical knockout
(recirculation kit is same step)
2. P.7"
G. Providing electrical power"
3. P.8 "H. Remove and Reinstall Baffle filters".
(1). Mount the recirculation kit to the bottom
of the cabinet. (Use the wood screws
provided with range hood)
(1)
(3). Before mounting the range hood,
be sure to connect the electrical
power cord. Mount the range hood
using the screws porvided to the
bottom (4 sides)of the recirculation kit.
(30" - 5 pcs screws)
(36"/42"/48" - 9 pcs screws)
W. Body Size
, P.13"M. Mounting Range Hood To Cabinet".
(2)
2°
23
(2). After securing the recirclation kit to the
bottom of the cabinet, make sure to run
the path for the electrical power cord.
(3)
(4). Before powering the unit, make sure all
screws and power cord have been
properly connected. After all connections
have been secured your recirculating
range hood is ready for use.
(4)