Preparing The Range Hood - Windster WS-5530SS Operation Manual

E. PREPARING THE RANGE HOOD
E. Preparing The Range Hood
1. Remove the top electrical
knockout, you may plan to
bring power to the range
hood either through the
cabinet or through the wall
(Fig.1)
2. Insert a screwdriver into the knockout slot and bend the knockout
back and forth. (Fig.2)
3. You may have to use pliers to pull the loosened knockout free.(Fig.3)
4. When installed, the bottom edge
of your range hood should be
28" ~ 32" above the top of the
cooking surface. (Fig.4)
Fig.2
5
Electrical Knockout
Fig.1
Fig.4
Fig.3