Page 1
User’s Manual WS-68N30SS WS-68N36SS WS-68N42SS NOTE: PLEASE INSPECT HOOD IMMEDIATELY UPON RECEIVING. CLAIM OF DAMAGE AFTER 7 DAYS OF DELIVERY WILL BE DENIED. This unit is designed for indoor residential use only. DO NOT USE OVER A WOOD GRILL OR MOUNT IN OUTDOOR ENVIRONMENT.
SAFETY INFORMATION SAFETY INFORMATION TO REDUCE THE RISK OF A FIRE, ELECTRICAL SHOCK, AND/OR INJURY OBSERVE THE FOLLOWING: Unit is intended for indoor residential use only. If you should have questions, contact the manufacturer at the address or telephone number listed in the warranty.
SAFETY INFORMATION TO REDUCE THE RISK OF FIRE, OR ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE. Regardless of heat level, never leave any surface materials unattended while operating an open flame. Always turn hood ON when cooking at high heat or when flambéing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).
PREPARATION PREPARATION BEFORE YOU START **BE SURE YOUR UNIT WILL FIT YOUR CEILING HEIGHT** **DO NOT INSTALL IF DAMAGED** **RETURN OR EXCHANGE WILL BE DENIED IF INSTALLED** Be sure you have all the content of your purchase and required tools for this installation.
INSTALLATION INSTALLATION 1. STANDARD INSTALLATION Make sure all preparation steps are completed. Determine your ceiling height to see if you need an extension. i. Hood unit (with glass) height = 3-1/4‖ (30‖ model only) ii. Hood unit (with glass) height = 4-1/4‖ (36‖ model only) iii.
INSTALLATION 2. EXTENSION INSTALLATION (OPTIONAL) AFTER COMPLETING STEP A – D OF STANDARD INSTALLATION, replace the standard support frame and duct cover with either the extension set or the short duct cover set. REPEAT “STEP F – M” from STANDARD INSTALLATION. 3.
CLEANING & MAINTENANCE CLEANING & MAINTENANCE .WARNING!!!. To prevent the possibility of a fire and explosion, do not use flammable liquids or solvents to clean the unit or any of its parts. Check to make sure all power sources are disconnected before servicing or taking unit apart for cleaning.
TROUBLESHOOTING TROUBLESHOOTING .WARNING!!!. Check to make sure all power sources are disconnected before starting any troubleshooting. Safety gloves and glasses should be worn when working on the unit. Serious injury or death may occur if safety precautions are not followed. WS-68N Series 1.
WARRANTY / CONTACT US PART LIST / REPLACEMENT / WIRING DIAGRAM PART LIST / REPLACEMENT Description Description Chimney Supporting Frames Control Board Duct cover Capacitor Hood body assembly Transition collar LED lights Squirrel cage motor Touch sensor control switch Aluminum filter WIRING DIAGRAM WARRANTY / CONTACT US...
Page 15
For a period of one (1) year from the date of purchase, if the product is determined to be defective, Windster will attempt to repair the product, at its option, at no charge. After the warranty period, customer must pay for all labor charges. During the "labor"...