Mounting Range Hood To Cabinet; Making The Electrical Connection - Windster WS-5530SS Operation Manual

H. MOUNTING RANGE HOOD TO CABINET
1. Position the hood in place so that :
a. The electrical line is routed through the appropriate Knockout opening.
This step will have to be accomplished while positioning the hood (Fig.10)
b. The large part of the keyhole mounting slots on the hood fit onto the hood
mounting screws projecting from the bottom of the cabinet. (Fig.11)
2. Adjust the hood so the front is flush with the cabinet front.
3. Tighten the hood mounting screws all the way into the cabinet or into
the 1" x 2" wood strips so the hood is secure.
Knockout opening
I. MAKING THE ELECTRICAL CONNECTION
1. Turn the three nuts at the front of bottom board.
2. Remove screws on wiring case,
fish out wires through the
knockout. (Fig.12)
3. Mark the electrical connection by
fastening all wires to the existing
wall wiring according to the their
colors. (Black to Black, White to
White, Green to Ground)
4. After connection is done, reinstall wiring case cover and bottom board.
5. Slide plastic collection cups onto the back metal mounting.
6. Turn on power and check operation of fan and light.
Color:
green/white/black
Fig.10 Fig.10
8
Fig.11
Fig.11
wire case
Fig.12