Page 1
User s Manual WS-5830SS WS-5836SS WS-5842SS NOTE: PLEASE INSPECT HOOD IMMEDIATELY UPON RECEIVING. CLAIM OF DAMAGE AFTER 7 DAYS OF DELIVERY WILL BE DENIED. This unit is designed for indoor residential use only. DO NOT USE OVER A WOOD GRILL OR MOUNT IN OUTDOOR ENVIRONMENT.
SAFETY INFORMATION TO REDUCE THE RISK OF A FIRE, ELECTRICAL SHOCK, AND/OR INJURY OBSERVE THE FOLLOWING: Unit is intended for indoor residential use only. If you should have questions, contact the manufacturer at the address or telephone number listed in the warranty.
Page 4
TO REDUCE THE RISK OF FIRE, OR ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE. Regardless of heat level, never leave any surface materials unattended while operating an open flame. Always turn hood ON when cooking at high heat or when flambéing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).
PREPARATION BEFORE YOU START **DO NOT INSTALL IF DAMAGED** **RETURN OR EXCHANGE WILL BE DENIED IF INSTALLED** Be sure you have all the content of your purchase and required tools for this installation. Installation may take at least 1 to 2 hours from start to finish. Plan to use as few elbows or turns as possible for more efficient air flow.
Page 8
For cabinet with recessed-bottom, use (2) 3” x 12” or 15” wood strips on both sides to balance the recession. Use (4) 1-1/4” long flat head screws to secure the wood strips to cabinet.(Fig. 1d) HOOD Inspect for any sign of defect or damage. (ie. scratches, dents, loose seams, etc.) Power up the unit to make sure it is working properly.
INSTALLATION 1. UNDER CABINET INSTALLATION Make sure all preparation steps are completed. Feed the wires coming out of the hood through the bottom of the cabinet. Lift the unit up flush against the wall and the bottom of the cabinet. Using the screws and washers provided, insert into each of the keyhole openings and tightly secure the unit against the bottom of the cabinet.
3. DUCTLESS INSTALLATION (OPTIONAL) Make sure all preparation steps are completed. Lift the ductless kit up flush against the wall and the bottom of the cabinet. (Fig. 2a) Using the screws and washers provided, insert into each of the keyhole openings and tightly secure the ductless kit against the bottom of the cabinet.(Fig.
OPERATION & FEATURES EASY ACCESS CONTROL SWITCH (from left to right) Button 1 – Power ON / OFF Button 2 – Low Speed Button 3 – Medium Speed Button 4 – High Speed Button 5 – Lights ON/OFF ALUMINUM FILTERS (2) 14”...
CLEANING& MAINTENANCE WARNING!!! To prevent the possibility of a fire and explosion, do not use flammable liquids or solvents to clean the unit or any of its parts. Check to make sure all power sources are disconnected before servicing or taking unit apart for cleaning. Please thoroughly clean the unit weekly as stainless steel can rust under certain condition or by improper cleaning.
TROUBLESHOOTING WARNING!!! Check to make sure all power sources are disconnected before starting any troubleshooting. Safety gloves and glasses should be worn when working on the unit. Serious injury or death may occur if safety precautions are not followed. WS58 Series Light Issue (All not New Transformer replacement is required.
PART LIST / REPLACEMENT Description Description Hood body assembly Bracket Air chamber Transformer Motor Capacitor Fan impeller Control switch Oil funnel Panel Protective grills LED light 6” collar Aluminum filters...
For a period of one (1) year from the date of purchase, if the product is determined to be defective, Windster will repair or replace the product, at its option, at no charge. After the warranty period, customer must pay for all labor charges. During the "labor"...
Need help?
Do you have a question about the WS-5830SS and is the answer not in the manual?
Questions and answers