Using Scan Templates
Once you register a template, your scanning operation becomes much easier.
Before using a template for scanning, you need to register the template. For instructions on how to register a template,
see the following section:
P.62 "Registering Scan Templates"
Using the templates for the Scan to E-mail function may require users to be authenticated for access to the SMTP
server. For instructions on how to use templates for Scan to E-mail, see the following section:
P.70 "Using templates for Scan to E-mail (When SMTP is selected for authentication method)"
Using scan templates
1
Place the original(s).
For help, refer to the Copying Guide.
On the touch panel, press [TEMPLATE] to display the TEMPLATE menu.
2
On the [RECALL] tab, select a group containing the template that you want to use.
3
If you select a private template group for which a password has been set, the password input screen appears.
In this case, proceed to Step 4.
If you select [PUBLIC TEMPLATE GROUP] or a private template group for which no password has been set,
the template buttons are displayed. In this case, proceed to Step 5.
If the desired private template group is not displayed on the screen, use
4 USING TEMPLATES
and
to switch between pages.
Using Scan Templates
67