Banner Page - Kyocera TASKalfa 650c Printing Manual

4.PRINTING FROM UNIX/Linux
¦ Banner Page
A banner page is automatically generated for each file in each job. The banner page contains the following items. The
banner page is always sent as a PCL5e job.
– The name of the user that submitted the print job.
– The job ID number and from which workstation it was submitted.
– The title of the job. This title can be specified using the "-t" option. The same title is used for every file within a job. The
default title is controlled by the "lp" command.
– The name of the printer or its IP address.
– The date and time when the job was printed according to the print server.
Only one copy of the banner page is printed for each file, even if a number of copies of the job are requested. The banner
page is sent to the equipment as a separate sub-job so that it is never stapled to the document.
The banner page is printed with the following settings.
– Copies = 1.
– Stapling off.
– Hole punching off.
– Orientation = portrait.
– Duplex off.
– Paper size as requested by the "-o" parameter or the printer's default value.
– The paper source and the media type for the banner page can be set to different values than the job's paper source
and media type.
– Auto paper source selection or the requested banner page source or media type.
– Output bin as requested by the "-o" parameter or the printer default value.
– 6 lines per inch
– Auto-wrap on.
– Automatic carriage-return when a line-feed is sent.
– The banner page is designed to fit the paper bigger than Statement / A5.
The banner page uses the default paper size if paper is set to:
- Statement
- A5
- A6
- B5
- Postcard
– The default is that the banner page is printed before the job so that it is in the correct stacking order.
– When the language is set to "raw" the banner is always disabled.
– The paper source and the media type for the banner page can be set to different values than the job's paper source
and media type. If a banner paper source is not specified then the auto source command is sent. If a banner media
type is not specified then no banner media type command is sent, so the printer's default value will be used.
– If the file being printed specifies the paper destination or the paper size internally the banner page may print to the
wrong output or on an incorrect paper size.
– Hole punching cannot be applied to banner pages.
4 PRINTING FROM UNIX/Linux
Printing from Application 137