2.PRINTING FROM WINDOWS
Inserting from the bypass tray
When the paper is being fed into the equipment
– Do not mix paper of different sizes.
– Place one sheet at a time on the bypass tray even if you wish to print multiple copies.
– Slightly curl the paper. Hold it gently as it is being fed into the equipment.
– Be careful not to cut your fingers with the edge of paper when holding the paper.
– Make sure that the trailing edge of the paper will not be fed into the equipment while you are holding it.
– The paper will be printed with a resolution of 300dpi.
When the paper is coming out of the equipment
– Hold the paper gently as it is coming out of the equipment.
– Be careful not to cut your fingers with the edge of paper when holding the paper.
– Do not pull out the paper forcibly as it is exiting from the equipment.
2 PRINTING FROM WINDOWS
Printing with Best Functions for Your Needs
83