Media Type; Paper Source; Paper Size - Kyocera TASKalfa 650c Printing Manual

4.PRINTING FROM UNIX/Linux
¦ Media Type
The paper source can also be selected using the media type using the following option.
Option Value Alternate Value
mtype=Plain
mtype=
Transparency
mtype=Thick1
mtype=Thick2
mtype=Thick3
In PostScript Deferred Media Selection is always turned on so the paper size has priority over the media type and the

paper source.

If this option is not specified, the default value will be used.
Example: The command to specify Thick1 media type is "lp -o mtype=Thick1 <filename>".
¦ Paper Source
The paper source can be selected using the following options.
Option Value Alternate Value
auto-source
manual
drawer1 upper
cas1
drawer2 lower
cas2
LCF lcf
In PostScript Deferred Media Selection is always turned on so the paper size has priority over the paper source.
If this option is not specified the command will not be sent so the printer's default value will be used.
Example: The command to specify the Large Capacity Feeder paper source is "lp - o lcf <filename>".
¦ Duplexing
The current duplex mode can be specified using the following options.
Option Value Alternate Value
simplex
duplex lduplex
duplex_long
duplex=long
hduplex
sduplex duplex_short
duplex=short
vduplex
If this option is not specified, the default value "simplex" will be used.
It is not necessary to specify duplexing for Booklet Mode (sduplex). Setting duplexing separately can override the booklet
mode setting for duplexing.
Example: The command to specify long edge duplexing is "lp -o duplex <filename>".
¦ Paper Size
The current paper size can be specified using the following options.
Option Value Alternate Value
letter lt
LT
A4 a4
Description
The paper source that contains Plain paper is
requested.
The paper source that contains transparency slides is
requested.
The paper source that contains Thick1 paper is
requested.
The paper source that contains Thick2 paper is
requested.
The paper source that contains Thick3 paper is
requested.
Description
Select auto paper tray selection.
Select Bypass Tray.
Select the 1st drawer.
Select the 2nd drawer.
Select the Large Capacity Feeder.
Description
Turn duplexing off.
Turn duplexing on with long edge binding.
Turn duplexing on with short edge binding.
Description
Select letter size paper.
Select A4 size paper.
4 PRINTING FROM UNIX/Linux
Printing from Application 127