Setting Up The Printer Ip Address Via The Network Connection; Figure 13: Installation Finished - Epson TM-T20II User Manual

Epson TM-T20II User Guide
To finish installing the USB driver, click the Finish button. The printer is installed in the
WIN system under the following name: EPSON TM-T20II Receipt.
5.2 Setting up the printer IP address via the network
connection
The printer IP address (Only possible for the version with network interface!) can be set up by
using the EpsonNet Config tool on the enclosed CD. If EpsonNet Config is already installed, run
it by clicking Start – All Programs – EpsonNet – EpsonNet Config Vx – EpsonNet Config.
1. Check if the printer is on the list. If it doesn't appear, click Refresh.
8/14

Figure 13: Installation finished

© IZUM, 15. 12. 2015, VIF-NA-EN-115, V2.0
VIF