HP StorageWorks 2/16 - SAN Switch Installation Manual page 50

Installing the SAN Switch 2/16
8. Record the IP address on the label affixed to the switch.
50
c. To verify that the IP address was entered correctly, type:
ipAddrShow
d. Once the IP address is verified as correct, remove the Serial cable, and
replace the shipping plug in the Serial port.
Caution: The Serial port is intended only for use during the initial setting of
the IP address and for service purposes. Using the Serial port during normal
switch operation or for regular maintenance is not recommended.
hp StorageWorks SAN Switch 2/16 Installation Guide