Displaying Switch Configuration Settings - HP StorageWorks 2/16 - SAN Switch Installation Manual

Managing the SAN Switch 2/16
Uses these steps to set the date and time of a switch.
1. Log into the switch as the admin user.
2. At the command line enter the following command:
Note:
70 are interpreted as 2000-2069. The date function does not support daylight saving
time or time zones.

Displaying Switch Configuration Settings

Use these steps to display the system configuration settings.
1. Log into the switch as the admin user.
2. At the command line enter the following command:
72
date "MMDDhhmmYY"
where:
— MM is the month, valid values are 01-12.
— DD is the date, valid values are 01-31.
— hh is the hour, valid values are 00-23.
— mm is minutes, valid values are 00-59.
— YY is the year, valid values are 00-99.
Year values greater than 69 are interpreted as 1970-1999; year values less than
configShow
The system configuration settings are displayed.
hp StorageWorks SAN Switch 2/16 Installation Guide