Command Line Interface; User Accounts; User Sessions; Admin Session - HP StorageWorks MPX200 Solution Manual

5 Command line interface

This chapter provides information on using the CLI for data migration services. It defines the guest
MPX200 account and the user sessions, admin and miguser. For each command, it provides a
description, the required session type, and an example.

User accounts

User accounts include the guest account, which is the default user account used to log in to the MPX200
Telnet session. The guest session has a view-only type of access. The default password for this account
is password.

User sessions

User sessions include the admin session and miguser session.

Admin session

The admin is the system administrator session that provides access to CLI commands that manage the
system resources. The default password for starting the admin session is config. You can start and
stop an admin session using the following commands:
admin [start/begin]
admin [end/cancel/stop]
For example:
MPX200 #> admin start
Password : ******
MPX200 (admin) #>
MPX200 (admin) #> admin cancel
MPX200 #>

miguser session

The miguser is the migration administrator session that has privileges to run CLI commands related to
the migration operations. The default password for starting the miguser session is migration. You can
start and stop a miguser session using the following commands:
miguser [start/begin]
miguser [end/cancel/stop]
For example:
MPX200 #> miguser begin
Password : *********
MPX200 (miguser) #>
MPX200 Multifunction Router Data Migration 73