Supported Fibre Channel Fabrics; Supported Storage Arrays; Hardware Setup - HP StorageWorks MPX200 Solution Manual

Supported Fibre Channel fabrics

DMS is currently supported with B-series, C-series and H-series 2-Gb, 4-Gb, and 8-Gb Fibre Channel
fabrics.

Supported storage arrays

Table 3 lists the storage array types for which DMS currently provides support.
Table 3 Supported storage arrays
Vendor
EMC
Hitachi Data Systems (HDS)
Hewlett-Packard (HP)
IBM
NetApp

Hardware setup

For information on installing your MPX200 Multifunction Router, see "Installing the MPX200" in the
HP StorageWorks MPX200 Multifunction Router User Guide.
To set up the hardware for DMS:
1. To manage the MPX200, the MPX200 must be accessible over the network connection from the
machine on which the HP StorageWorks mpx Manager is installed.
2. Set up the MPX200 management port IP address. For details, see the HP StorageWorks MPX200
Multifunction Router User Guide.
3. Connect the storage array (source and destination) controller ports to an Fibre Channel switch.
For details on various topology configurations, see
4. Ensure that the controller ports are seen as online on the Fibre Channel switches.
Storage array
CLARiiON CX family
CLARiiON AX family
Symmetrix DMX family
Thunder 95xx V series
Lightning 99xx V series
Attachable Modular Storage (AMS) family
Workgroup Modular Storage (WMS) family
Universal Storage Platform (USP) family
HP StorageWorks Modular Storage Array (MSA) family
HP StorageWorks Enterprise Virtual Array (EVA) family
System Storage DS3000 family
System Storage DS4000 family
System Storage DS5000 family
System Storage DS6000 family
System Storage DS8000 family
FAS2000 Series
FAS3100 Series
FAS6000 Series
MPX200 Multifunction Router Data Migration
"Supported topologies" on page 19.
25