Create Data Migration Job: Batch - HP StorageWorks MPX200 Solution Manual

4. Repeat the preceding steps to create migration jobs for all source LUNs to be migrated in a batch,
as shown in Figure
Figure 20 Create Data Migration Job: batch
.
5. To save your migration job and assign job attributes, click Schedule or, to abandon your changes,
click Close.
6. In the Data Migration Jobs Options dialog box
as follows:
a. Under Scheduling Type, select one of the following:
• Click Start Now to start the job immediately.
• Click Schedule for Later, and then enter a Start Time and Start Date.
• Click Serial Schedule Jobs, and then assign a priority (1–256) in the Job Priority box,
where a lower value indicates that the job is scheduled earlier than jobs configured with
higher values. For details on Serial Schedule Jobs, see
jobs" on page 53.
b. In the Job Description box, enter a user-defined name to describe this data migration job.
c. In the Group Name box, select a job group name from the list. The group name makes it
easier to view the job status on a group basis.
d. In the IO Size box, select either one of the default I/O sizes, or enter a custom value.
7. To save the data migration job options, click Apply or, to abandon changes to this data migration
job, click Cancel.
52 Using DMS for data migration
20.
(Figure 18 on page 48), specify the job attributes
"Starting serial scheduled