Assigning LUNs from an EVA 4/6/8000 series array
Storage Vendor
Array Model
LUN Assignment Tool
To assign LUNs:
1.
Perform zoning as follows:
a.
Connect the Fibre Channel ports of the data migration appliance to a switch where the
storage controller ports are also logged.
b.
Using switch management tools, create a zone, DM_Host_EVA.
c.
In this zone, add the WWPN of the data migration appliance Fibre Channel ports and
storage controller ports.
d.
Save the zoning information and activate the new zoning configuration.
2.
Open HP StorageWorks Command View EVA, as shown in
Figure 47 Opening HP StorageWorks Command View EVA
.
3.
In the left pane, double-click the array that you want to manage. This expands the nodes under
the selected array.
4.
In the left pane, click the Hosts node.
198
Data migration planning
HP
EVA 4/6/8000 series arrays
HP Command View EVA user interface
Figure
47.