3.
Select the scheduling mode as follows:
1.
In the top section of the Data Migration wizard, click Options.
2.
In the Migration Schedule Options dialog box, select either Schedule in batch mode or
Schedule individual job, as shown in
3.
Click OK.
Figure 16 Migration Schedule Options: individual job
.
4.
Depending on your selection in the preceding step, continue with either
data migration job in the GUI
Scheduling an individual data migration job in the GUI
Follow these steps to schedule an individual data migration job in the HP StorageWorks mpx Manager.
(To perform this operation in the CLI, see
1.
Start the Data Migration wizard by following the steps specified in
Wizard" on page 45.
2.
In the Migration Schedule Options dialog box, click Schedule individual job, and then click OK.
The right pane of the Create Data Migration Job dialog box shows the type of array (Source,
Destination, or Src+Dest) for each of the arrays available for configuring the data migration job.
46
Using DMS for data migration
Figure
16.
or
"Scheduling data migration jobs in batch
Scheduling an individual data migration job in the
Scheduling an individual
mode" on page 51.
CLI.)
"Starting the Data Migration