Lunmask - HP StorageWorks MPX200 Solution Manual

lunmask

Maps or removes a target LUN mapping to an initiator. The CLI prompts you to select from a list of
virtual port groups, targets, LUNs, and initiators, and to present the target if it is not already presented.
Session: admin
Syntax: lunmask add | rm
Keywords:
• maps a LUN to an initiator
add
• removes the mapping of a LUN from an initiator
rm
Example 1: The following example shows the lunmask add command:
MPX200 <1> (admin) #> lunmask add
Index Type
----- ----
0 FC
Please select an Initiator from the list above ('q' to quit): 0
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 50:0a:09:80:85:95:82:2c,50:0a:09:81:85:95:82:2c
1 20:00:00:14:c3:3d:cf:88,21:00:00:14:c3:3d:cf:88
2 20:00:00:14:c3:3d:d3:25,21:00:00:14:c3:3d:d3:25
3 50:06:01:60:cb:a0:35:f6,50:06:01:68:4b:a0:35:f6
4 50:06:01:60:cb:a0:35:f6,50:06:01:60:4b:a0:35:f6
Please select a Target from the list above ('q' to quit): 0
Index (LUN/VpGroup)
----- -------------
0 0/VPGROUP_1
1 1/VPGROUP_1
2 2/VPGROUP_1
Please select a LUN to present to the initiator ('q' to quit): 1
Index (IP/WWNN)
----- -----------
0 0.0.0.0
1 0.0.0.0
2 20:00:00:c0:dd:13:2c:c4
3 20:00:00:c0:dd:13:2c:c5
Please select a portal to map the target from the list above ('q' to quit): 2
Target Device is already mapped on selected portal.
All attribute values that have been changed will now be saved.
Example 2: The following example shows the lunmask rm command:
MPX200 <1> (admin) #> lunmask rm
Index Type
Mapped (WWNN,WWPN/iSCSI Name)
------ ----------------------
Yes 20:00:00:1b:32:0a:61:80,21:00:00:1b:32:0a:61:80
(MAC/WWPN)
------------
00-c0-dd-13-2c-c4
00-c0-dd-13-2c-c5
21:00:00:c0:dd:13:2c:c4
21:00:00:c0:dd:13:2c:c5
Mapped (WWNN,WWPN/iSCSI Name)
MPX200 Multifunction Router Data Migration 105