Show Migration_Luninfo - HP StorageWorks MPX200 Solution Manual

show migration_luninfo

Provides the current status and path information for any array LUN. Use this command to check the
usability of a path in failover scenarios. The paths specified as passive are not used by data migration
jobs if the current path fails. The passive path is capable of reading only the LUN size, vendor, and
product information, but cannot perform any I/O operation.
Session: guest
Example 1:
MPX200 <1>
Index WWPN, PortId/ iScsiName, Ip Add
----- ---------------------------------
0 50:0a:09:81:95:95:82:2c, 00-00-00
1 50:06:01:68:4b:a0:35:f6, 61-04-00
2 21:00:00:14:c3:3d:d3:25, 48-00-dc
3 21:00:00:14:c3:3d:cf:88, 48-00-da
Please select a Target from the list above ('q' to quit): 1
Index (LUN/VpGroup)
----- -------------
0 0/VPGROUP_1
1 4/VPGROUP_1
2 5/VPGROUP_1
3 6/VPGROUP_1
4 7/VPGROUP_1
5 8/VPGROUP_1
6 9/VPGROUP_1
7 10/VPGROUP_1
8 11/VPGROUP_1
Please select a LUN from the list above ('q' to quit): 1
LUN Information
-----------------
WWULN
LUN Number
VendorId
ProductId
ProdRevLevel
Portal
Lun Size
Lun State
LUN Path Information
--------------------
Controller Id
-------------
2
Example 2: The following example shows the show migration_luninfo command output for an
array that returns multiple WWULNs:
MPX200 <1>
Index WWPN, PortId/ iScsiName, Ip Add
#> show migration_luninfo
60:06:01:60:70:32:22:00:c6:02:f7:88:09:22:df:11
4
DGC
RAID 5
0223
0
6144 MB
Online
WWPN, PortId/ IQN, IP
---------------------------------
50:06:01:68:4b:a0:35:f6, 61-04-00
#> show migration_luninfo
Symbolic Name
--------------------
NETAPP LUN-0
DGC RAID-3
SEAGATE ST336754FC-2
SEAGATE ST336754FC-1
Path Status
-----------
Current
Symbolic Name
MPX200 Multifunction Router Data Migration
Target Type
-------------
Src+Dest
Src+Dest
Src+Dest
Src+Dest
Target Type
125