Transporting The Printer - Epson LQ-670 User Manual

c
Caution:
❑ Never use alcohol or thinners to clean the printer; these
❑ Be careful not to get water on the printer mechanism or
❑ Do not use a hard or abrasive brush.
❑ Do not spray the inside of the printer with lubricants;

Transporting the Printer

If you need to transport your printer some distance, carefully
repack it as described below, using the original box and packing
materials.
1. Turn off the printer and remove any paper loaded in the printer.
2. Unplug the power cord from the electrical outlet; then disconnect
the interface cable from the printer. If an optional cut-sheet
feeder is installed, remove it.
w
Warning:
If the printer has been used recently, the print head may be hot.
Let it cool before attempting to remove the ribbon cartridge.
3. Remove the paper guide. Remove the ribbon cartridge as
described in steps 1 through 3 of "Replacing the Ribbon
Cartridge" earlier in this chapter. Then close the printer cover.
4. Repack the printer, ribbon cartridge, paper guide, and power
cord in the original packing materials and place them in the
printer's original box.
6-6
Maintenance and Transportation
chemicals can damage the printer components as well as
the case.
electronic components.
unsuitable oils can damage the printer mechanism.
Contact your EPSON dealer if you think lubrication is
needed.