Epson LQ-670 User Manual page 52

4. Slide the right edge guide until it rests against the guide mark,
as shown below.
5. While adjusting the left edge guide to match the width of your
paper, insert a sheet of paper between the edge guides until it
meets resistance. Be sure to load your paper printable side up.
After a few seconds, the printer automatically advances the
paper to the loading position. The printer is ready to accept
data from your computer and print.
Note:
If the platen rotates but the printer does not load the paper,
completely remove the paper and then insert it all the way into the
printer again. If you need to adjust the position of the paper after it is
loaded, see "Adjusting the loading position" on page 3-27.
3-8
Paper Handling
guide mark