Epson LQ-670 User Manual page 130

When the printer ejects the paper, the Paper Out light flashes
and the Pause light comes on.
Cause
The printer has not fully
ejected your paper.
Continuous paper
The printer does not load continuous paper.
Cause
The paper release lever is set
to the single-sheet position.
The paper has come off the
tractor.
When you send data or press the Load/Eject button, the platen
rotates but the printer does not feed the paper.
Cause
The paper release lever is set
to the single-sheet position.
The paper has come off the
tractor.
The paper has been fed back
to the standby position.
7-10
Troubleshooting
What to do
Remove the paper by hand; the
Paper Out light goes out. If you are
printing a multiple-page document,
insert a new sheet of paper into the
paper guide. The Pause light goes out
and the printer automatically loads the
paper and resumes printing.
What to do
Set the paper release lever to the
tractor position. See "Setting the paper
release lever" in Chapter 3.
Reattach the paper to the tractor as
described in "Loading continuous
paper with the tractor" in Chapter 3.
What to do
Move the paper release lever to the
tractor position.
Reattach the paper to the tractor as
described in "Loading continuous
paper with the tractor" in Chapter 3.
Press the Load/Eject button to load
the paper.