Epson LQ-670 User Manual page 129

Paper feeding is crooked or the paper jams.
Cause
The paper guide is not
properly installed.
The edge guides are not
positioned correctly.
You may not be using the
right type of paper for the
printer.
The paper is old or creased.
Note:
If paper is jammed in the paper path, see "Clearing a Paper Jam" later in this
chapter.
The printer does not fully eject the paper.
Cause
You may not be able to fully
eject your paper using the
LF/FF button.
Your paper may be too long.
What to do
Remove the paper guide and install it
as described in "Attaching the paper
guide" in Chapter 1.
Move the edge guides so that they
match the width of your paper.
Be sure you're using the right type of
paper. See the paper specifications in
Appendix A.
Use only new, clean sheets of paper.
What to do
Use the Load/Eject button to eject the
paper.
Make sure the page length of your
paper is within the specified range. See
the single-sheet paper specifications in
Appendix A. Also check and adjust
the paper size setting in your
application or the printer driver.
Troubleshooting
7
7-9