Installing The Cut-Sheet Feeder - Epson LQ-670 User Manual

You can load up to 150 single sheets of paper, 40 single-sheet
multi-part forms, 25 envelopes, or 50 postcards in the
high-capacity cut-sheet feeder (bin 1 of the double-bin feeder).
You can load an additional 50 single sheets in the second-bin
cut-sheet feeder (bin 2 of the double-bin feeder). With the
double-bin cut-sheet feeder, you can load two different types
or sizes of paper at one time.
Note:
For detailed paper specifications, see Appendix A.

Installing the cut-sheet feeder

The cut-sheet feeder comes with a sheet guide for stacking printed
sheets. To install the cut-sheet feeder, you need to attach both the
cut-sheet feeder and the sheet guide. Follow the steps below.
Note:
You install both the high capacity cut-sheet feeder and the double-bin
cut-sheet feeder the same way, as described below. Before you install the
double-bin cut-sheet feeder, however, assemble it as described in the
cut-sheet feeder manual.
1. Make sure the printer is turned off.
2. Close the sprocket covers if they are open, and lock the sprocket
units by pushing down the lock levers if necessary.
Note:
You do not need to remove your continuous paper from the tractor
to use the cut-sheet feeder. For information on switching between
the cut-sheet feeder and continuous paper, see page 5-13.
Using Printer Options
5
5-3