Epson LQ-670 User Manual page 132

The top-of-form position of your continuous paper varies
when you print several pages.
Cause
The paper size setting in your
application or the printer
driver may not match the size
of the paper you are using.
The printer's page length
setting may not match the
size of the paper you are
using.
Your paper may be too heavy. Make sure that the weight of your
The printer prints on (or too far away from) the perforation of
your continuous paper.
Cause
The tear-off position is set
incorrectly.
The paper size setting in your
application or the printer
driver may not match the size
of the paper you are using.
7-12
Troubleshooting
What to do
Check the paper size setting in your
application or the printer driver.
Check the "Page length for tractor"
setting using the printer's
default-setting mode or the EPSON
Remote! utility. See "Using the
Default-Setting Mode" in Chapter 4,
or "Using the EPSON Remote! printer
utility" in Chapter 2.
paper is within the specified range.
See the continuous paper
specifications in Appendix A.
What to do
Adjust the tear-off position using the
LF/FF or Load/Eject button. See
"Adjusting the tear-off position" in
Chapter 3.
Check the paper size setting in your
application or the printer driver.