Advanced Control Panel Functions - Epson LQ-670 User Manual

When the optional cut-sheet feeder is installed, press this button to
select the cut-sheet feeder bin you want to use. Select Bin 1 to use
the high-capacity cut-sheet feeder, and select Bin 1 or Bin 2 to use
the double-bin cut-sheet feeder.
To print on postcards, select Card mode by pressing this button
until both Tear Off/Bin lights are on. (Card mode is available only
when the paper thickness lever is set to "2" or higher on the scale.)
Note:
Paper source settings (such as bin 1 or bin 2) made in your software
override bin settings made with the Tear Off/Bin button, so use your
software to make this setting whenever you can.

Advanced Control Panel Functions

Besides giving you control of the basic operation of the printer,
the control panel allows you to enter the printer's default-setting
and quiet modes, and to access several features helpful when
troubleshooting.
To use the functions below (in italics), turn on the printer while
pressing the corresponding control panel button(s).
Letter-quality self test = Load/Eject
Performs a letter-quality self test, which helps you determine the
source of some printing problems. See "Printing a Self Test" in
Chapter 7 for details.
Draft self test = LF/FF
Performs a draft self test, which helps you determine the source
of some printing problems. See "Printing a Self Test" in Chapter 7
for details.
Using the Control Panel
4
4-7