Attaching The Paper Guide; Plugging In The Printer - Epson LQ-670 User Manual

Attaching the paper guide

To attach the paper guide, slide the slots on the paper guide all the
way onto the mounting pegs in the printer as shown below.

Plugging in the Printer

1. Make sure the printer is turned off. The printer is off when
the top of the Operate button is flush with the raised tabs
on either side of the button.
2. Check the label on the back of the printer to make sure its
voltage matches that of your electrical outlet. Also make sure
the plug on your printer's power cord matches your electrical
outlet.
c
Caution:
It is not possible to change the printer's voltage. If the rated
voltage and your outlet voltage do not match, contact your
dealer for assistance. Do not plug in the power cord.
3. If the power cord is not attached to the printer, plug the
appropriate end into the AC inlet on the back of the printer.
4. Plug the power cord into a properly grounded electrical outlet.
Setting Up the Printer
1
1-9