Epson LQ-1050+ Paper Manual

Cross-had screwdriver

Printer Specifications

Printing
Print method: 24-pin impact dot matrix
Print speed:
Character per Inch
Quality
High-speed draft
10
Normal draft 10
12
Letter Quality 10
12
Bidirectional logic-seeking for text and
Printing direction:
graphics. Bidire&ional for graphics.
(Unidirectional can be selected with a DIP
switch or by using the proper software
command.)
1/6 inch or programmable in increments Notes:
Line spacing:
of 1/360 inch
Paper feed speed:
Single sheet: 3.0 inches per sec
Continuous: 2.7 inches per sec
24-Pin Printers
Characters/second/line
300
246
82
98
(60 ms/line)
(65 ms/line)
LQ850/1050+ DOT-MATRIX PRINTER
Printable columns:
12cpi
12cpi condensed
Buffer: 6KB or 0KB (panel button selectable)
Character fonts:
Epson Roman
I
Epson Sans Serif
96 standard ASCII character set
(including italic characters)
14 international character sets
1 Legal character set
Epson Extended Graphics character set
5 graphics character sets
Single Sheet 14 lb to 24 Ib
continuous 14 lb to 22 lb
Multi-put
forms
Envelope
Paper thickness
Single Sheet 0.0025 to 0.0055 inch
Continuous
Envelope
L a b e l
Number of copies: One original plus up to 3 copies
(at normal temperature)
One original plus up to 2 copies
(all temperature ranges)
Total thickness must not exceed 0.012 inch
(0.32 mm)
The use of 24 lb paper is only available at normal temperature.
l
Printing past the edge of envelopes, multi-part forms, labels,
l
or paper that is thicker than normal can damage the print
Labels with a pressure sensitive covering either glued or
l
tacked onto the backing sheet, can be printed under the
conditions listed below. The total thickness may not exceed
0.0118 inch (03 mm).
96 164
160 272
Available sizes
(Characters per inch)
10,12,15, Proportional
10,12,15, Proportional
I
12 Ib to 15 lb per sheet.
Maximum number sheets = 4
12 Ib to 24 lb
(0.065 to 0.14 mm)
0.0025 to 0.012 inch
(0.065 to 0.32 mm)
0.0063 to 0.0197 inch
(0.16 to 0.52 mm)
maximum 0.0075 inch
(0.19 mm)
LQ-850/1050+-1