Table of Contents
Advertisement
Using Other Emulations
Your printer is designed to work best in its LJ4 emulation mode,
so LJ4 emulation mode is recommended whenever possible. If
you want to use an emulation other than LJ4, you can select ESC/
P 2, FX, l239X, or GL/2 emulation mode.
Match the emulation mode in the Emulation Menu with drivers
or print data already formatted for EPSON LQ or FX series
printers, or IBM printers.
Note:
The printer's intelligent emulation switching (IES) feature
automatically switches between emulation modes, depending on the
received data. The available emulation modes are LJ4, GL2, I239X, ESC/
P 2 and FX.
The default setting for the emulation mode is [Auto], and the
intelligent emulation switching function is validated. Use the
printer driver or SelecType for modifying the emulation mode.
ESC/P 2 or FX Mode
This section lists the ESCP2 menu and FX menu options.
Unless specifically mentioned, the same items are available for
either mode.
Font
The Font option selects a font by typeface.
The factory default font is Courier. After selecting the desired
font, you can also adjust the character spacing and size of the font
with the Pitch and Condensed options described below.
5-31
SelecType
5
Advertisement
Table of Contents
