Table of Contents
Advertisement
Paper Jam
Paper is jammed in the paper path. Open the printer cover and
clear the jammed paper as described in the PAPER JAM section
in this chapter. After the jam is cleared, the jammed page's print
data is automatically reprinted.
Opening the printer cover exposes the fuser, which is marked by
a CAUTION Hot Surface Avoid Contact label. Be careful not to
touch the fuser.
Paper Out XXX YY
There is no paper in the specified paper source (XXX). Load paper
of the indicated size (YY) into the source. See your Getting Ready!
booklet or Chapter 1 for instructions on loading paper.
Paper Set XXX YY
The paper loaded in the tray (XXX) does not match the required
paper size (YY). Replace the paper with the correct size of paper
and press Continue .
6-18
Troubleshooting and Maintenance
Advertisement
Table of Contents
