Table of Contents
Advertisement
Completely blank pages
If, after checking the Toner status in the EPSON Status Monitor
2, or the SelecType Toner option in the Setup Menu, the Toner
message indicates that the amount of toner is low, read
"Replacing the Imaging Cartridge" starting on page 6-23.
Check that the Imaging Cartridge are installed as described on
page 6-23.
The problem may be with your software program or interface
cable. Print out a status sheet by pressing the control panel button.
If blank pages continue to print, the problem may be with the
printer. Turn off the printer and contact your dealer.
The printed image is light or faint.
Your paper may be moist or damp. The higher the moisture
content in the paper, the lighter the printed output. Do not store
your paper in a humid or damp environment.
Take out the Imaging Cartridge, shake it gently from side to side
to distribute the toner, and then reinstall it. If the problem persists,
replace the cartridge as described on page 6-23.
The Toner Save mode may be on. Turn off the Toner Save mode
using the printer driver, OneTouch mode 2, or SelecType.
The image is too dark.
If the problem persists, replace the Imaging Cartridge as
described on page 6-23.
Troubleshooting and Maintenance
6
6-11
Advertisement
Table of Contents
