Using Other Emulations; Esc/P 2 Or Fx Mode - Epson EPL-N1200 Reference Manual

Using Other Emulations

Your printer is designed to work best in its LJ4 emulation
mode, so LJ4 emulation mode is recommended whenever
possible. If you want to use an emulation other than LJ4, you
can select ESC/P 2, FX, I239X, or GL/2 emulation mode.
Match the emulation mode in the Emulation Menu with
drivers or print data already formatted for EPSON LQ or FX
series printers, or IBM printers.
Note:
The printer's intelligent emulation switching (IES) feature
automatically switches between emulation modes, depending on the
received data. The available emulation modes are LJ4, GL2, I239X,
ESC/P 2, and FX.
To enable intelligent emulation switching, select Auto on the
Emulation Menu using the printer driver, the Remote Control
Panel utility, or the SelecType mode.

ESC/P 2 or FX Mode

This section lists the ESCP2 menu and FX menu options.
Unless specifically mentioned, the same items are available for
either mode.
Font
The Font option selects a font by typeface.
The factory default font is Courier. After selecting the desired
font, you can also adjust the character spacing and size of the
font with the Pitch and Condensed options described below.
6-22
SelecType