Epson EPL-N2010 Reference Manual page 38

Note:
If you have not installed the printer driver, see your Getting Ready!
guide for installation instructions.
For access through your application software, click the
Print or Printer Setup command in the File menu. You also
may need to click Setup, Options, Properties, or a
combination of these buttons.
For direct access through Windows 95 and Windows 98
or Windows NT 4.0, ckick Start, point to Settings, and
click Printers. Next, right-click the EPSON EPL-N2010 icon
and click Properties (in Windows 95 and Windows 98) or
Document Defaults (in Windows NT 4.0) in the menu
that appears. Be sure to right-click the printer icon. Then
select the Details tab at the top of the window, and click
the Setup button.
For direct access through Windows 3.1, Windows 3.11, for
Workgroups, and Windows NT 3.51, double-ckick the
Printers icon in the Control Panel dialog box. Next, click
EPSON EPL-N2010 in the Installed Printers list box, and
then click the Setup button.
2. The Printer Settings menu appears. Click on the arrow next
to the Paper Source box to see the list of sources available.
Click Manual Feed.
3. Click the Paper tab to see the Paper menu. Click the arrow
next to the Paper Size box to see the list of available paper
sizes.
Scroll through this list and click on the paper size that matches
the paper you will load in the printer.
4. If the correct paper size is already loaded, skip to step 4.
Paper Handling
2
2-9