Using The Onetouch Modes - Epson EPL-N2010 Reference Manual

Using the OneTouch Modes

The OneTouch modes are part of SelecType mode, but they are
more limited and easier to use. The settings you make in these
modes and SelecType are reflected in each other.
To enter OneTouch mode 1, press the SelecType button
(repeatedly if necessary) until the light next to Paper Source
comes on indicating the printer is now in OneTouch mode 1. The
current OneTouch mode 1 settings for Paper Source, page Size,
Manual Feed, and Orientation are shown on the display above the
corresponding setting. For example, Port or Land is shown above
Orientation.
5
OneTouch mode 1
To enter OneTouch mode 2, press the SelecType button
(repeatedly if necessary) until the indicator light next to RITech
comes on indicating the printer is now in OneTouch mode 2.
The current OneTouch mode 2 settings for RITech, Copies, MP
Tray Size, and Toner Save Mode are shown on the display above
the corresponding setting. For example, On or Off is shown
above Toner Save Mode.
OneTouch mode 2
To make OneTouch settings, access one of the modes as
described above and press the button located under the setting
you want to change to cycle forward through the available
options. You can also press ALT (SelecType) and the button to
cycle backward through the available options.
5-29
SelecType