Table of Contents
Advertisement
Service Req eXXX (cXXX)
A controller error or a print engine error has been detected. Write
down the error number listed on the display and turn off the
printer. Wait at least five seconds and then turn it back on. If this
error still occurs, turn off the printer, unplug the power cord, and
contact a qualified service person.
Standby
The printer is in its low power state; however, it is still on line if
the On Line light is on.
Toner Low
The printer is almost out of toner. You should prepare a new
Imaging Cartridge; the toner will be out soon.
Warming Up
The printer is warming up.
Troubleshooting and Maintenance
6
6-21
Advertisement
Table of Contents
