Table of Contents
Advertisement
Emulation menu
Use this menu to select the printer emulation mode. You can
specify different emulations for each interface; in other words, for
each computer you connect. Since each emulation mode has its
own specific options, make settings in the LJ4, ESCP2, FX, GL2,
or I239X menus, as necessary. The options you can set are the same
for every interface.
Item
Parallel, Serial, AUX
*1 Available only when the PostScript 3 module is installed.
Note:
The default setting may change depending on which option is installed.
Print a status sheet to confirm the current default settings.
Printing menu
The settings in the printing Menu can be set from within your
software. The settings you make in your software override
SelecType settings.
All items in the printing Menu except Resolution, Wide A4, and
Skip Blank Page can be accessed directly with the OneTouch
Modes. See "Using the OneTouch Modes" later in this chapter.
Paper Source
Specifies whether paper feeds into the printer from the MP Tray,
the standard lower paper cassette, or from optional lower paper
cassettes.
If you select Auto, paper feeds from the tray containing the paper
that matches the paper selected in the Page Size setting.
5-14
SelecType
Values
Auto, LJ4, ESCP2, FX, I239X, PS3*1,
GL2
Advertisement
Table of Contents
