Lj4 Menu - Epson EPL-N2010 Reference Manual

Note:
After changing these settings, reset the printer to make the new
settings effective. To reset the printer, Press the Continue and
SelecType buttons simultaneously. Altematively, turn off the
printer, then after 5 seconds, turn it back on.
Resetting the printer erases all print jobs. Make sure the On Line
light is not blinking when you reboot the printer.

LJ4 menu

Note:
If You always use the HP LaserJet 4 printer driver in your software, you
should change settings using your software. The software settings
always override the LJ4 menu options.
FontSource
Selects the default font source.
Font Number
Selects the default font number from the default font source.
Pitch
Specifies the default font pitch if the font is scalable and fixed-
pitch. You can select from 0.44 to 99.99 CPI, in increment of 0.01
CPI.
Height
Specifies the default font height if the font is scalable and
proportional. You can select from 4.00 to 999.75 points, in
increments of 0.25 points.
5-26
SelecType