Cleaning The Printer Case - Epson EPL-N2010 Reference Manual

If only a small amount of toner is present, carefully wipe out the
inside of the printer with a clean, dry cloth.
If a large amount of toner is present, use a small vacuum cleaner
(available from computer supply stores) to remove it. Then
carefully wipe with a clean, dry cloth.
c
Caution:
Toner and other fine powders can damage some vacuum cleaners.
Be sure to read the instructions for your vacuum cleaner before
you use it on spilled toner.
Note:
If you spill toner on your clothing, rinse it off with cold water. Do not
use hot water as it may cause the toner to leave a permanent stain.

Cleaning the printer case

If the printer's outer case is dirty or dusty, turn off the printer and
clean it with a soft, clean cloth dampened with a mild detergent.
c
Caution:
Never use alcohol or thinner to clean the printer cover; these
chemicals can damage the components and the case. Be careful
not to get water on the printer mechanism or any electronic
components.
Troubleshooting and Maintenance
6
6-29