Table of Contents
Advertisement
w
Warning:
Opening the printer cover exposes the fuser, which is marked
by a CAUTION Hot Surface Avoid Contact label. Be careful
not to touch the fuser.
If necessary, remove the Imaging Cartridge and any paper left
in the paper feed path, and then reinsert the Imaging
Cartridge.
3. Close the printer cover. Tap the edges of the paper stack on a
flat surface and carefully reload it into the paper bin. (Do not
reload curled or wrinkled sheets.) Close the front cover.
4. The jammed page's print data is automatically reprinted.
Feed Jam when using the lower paper cassette.
1. Remove the paper tray from the lower paper cassette.
2. Remove any folded paper from the paper cassette, and
discard any curled or wrinkled sheets.
3. Tap the edge of the paper stack. Then reinsert it into the paper
tray making sure the paper is evenly aligned and rests below
the maximum paper mark.
Troubleshooting and Maintenance
6
6-3
Advertisement
Table of Contents
